ADVANTECH CO., LTD PCL-728 Card Type Analog output card Chip Set Unidentified Maximum Onboard Memory Unidentified I/O Options 9-pin serial ports (2 RS-232) Hard Drives supported None Floppy drives supported None Data Bus 8-bit ISA Card Size Half-length, half-height card [Image] CONNECTIONS Function Label Function Label 9-pin serial port 1 CN1 9-pin serial port 2 CN2 CHANNEL 1 SOURCE SELECTION Setting JP4 » Internal reference source Pins 3 & 4 closed External reference source Pins 1 & 2 closed CHANNEL 2 SOURCE SELECTION Setting JP8 » Internal reference source Pins 3 & 4 closed External reference source Pins 1 & 2 closed CHANNEL 1 INTERNAL VOLTAGE SELECTION Setting JP3 » -5V reference source Pins 3 & 4 closed -10V reference source Pins 1 & 2 closed CHANNEL 2 INTERNAL VOLTAGE SELECTION Setting JP3 » -5V reference source Pins 3 & 4 closed -10V reference source Pins 1 & 2 closed CHANNEL 1 POLARITY OUTPUT SELECTION Setting JP1 JP5 » Unipolar output Pins 1 & 2 closed Pins 1 & 2 closed enabled Bipolar output Pins 2 & 3 closed Pins 2 & 3 closed enabled CHANNEL 2 POLARITY OUTPUT SELECTION Setting JP2 JP9 » Unipolar output Pins 1 & 2 closed Pins 1 & 2 closed enabled Bipolar output Pins 2 & 3 closed Pins 2 & 3 closed enabled CHANNEL 1 CURRENT SINK RANGE SELECTION Range JP6 » 4 - 20mA enabled Pins 3 & 5, 4 & 6 closed 0 - 20mA enabled Pins 1 & 3, 2 & 4 closed CHANNEL 2 CURRENT SINK RANGE SELECTION Range JP10 » 4 - 20mA enabled Pins 3 & 5, 4 & 6 closed 0 - 20mA enabled Pins 1 & 3, 2 & 4 closed BASE I/O ADDRESS SELECTION Setting SW1/1 SW1/2 SW1/3 SW1/4 SW1/5 SW1/6 SW1/7 SW1/8 200h Off On On On On On On On 204h Off On On On On On On Off 208h Off On On On On On Off On 20Ch Off On On On On On Off Off 210h Off On On On On Off On On » 300h Off Off On On On On On On 3E0h Off Off Off Off Off On On On 3E4h Off Off Off Off Off On On Off 3E8h Off Off Off Off Off On Off On 3ECh Off Off Off Off Off On Off Off 3FOh Off Off Off Off Off Off On On Note: A total of 125 valid base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/8 is the Least Significant Bit and switch SW1/1 is the Most Significant Bit. The switches have the following decimal values: SW1/1=512, SW1/2=256, SW1/3=128, SW1/4=64, SW1/5=32, SW1/6=16, SW1/7=8, SW1/8=4. Turn off the switches and add the values of the switches to obtain the correct memory address. (Off=1, On=0)